Skip Navigation Website Accessibility
 West (405) 495-4699 South (405) 794-0026                                                           All Orders over $50.00 include Free Shipping!
We Sell Toys for Big Girls

Embroidery 101 at the South Store, March 31, 2020

With Jackie Branscum 

Watch for project details


Badge Holder 5X7” hoop


Skills to learn:  How to make an In-The-Hoop Badge Holder to use at events, sew togethers, retreats, etc.


2 pieces Cut-a-Way  (Polymesh or No Show Mesh) Stabilizer to fit 5X7 Hoop

Fabric & Interfacing:   cut as follows: (Width of design is about 5” and Length is 6.9” from top to the bottom.  ) NOTE:  If you plan to add the optional back pocket, cut A & B fabrics and follow directions for the back pocket.*  I added the Pellon Shapeflex 101F to the back of my 3 lining pieces (E, H & J)  for the front of the badge Holder to reinforce the fabric since I didn’t use any batting.

                Back Exterior Fabric                         A             8”X 6”

                Back pocket Fabric(optional)       B             10”X 6”  folded to 5”X 6” and pressed*

                Top front Fabric                                C             2”X 6”

                Top Front Lining                                D             2”X 6”  

                Top Front Interfacing                     E              2”X 6”   Press to the wrong side of the lining fabric

Bottom Front Exterior Fabric       F              6”X 8”

                Bottom Front Lining Fabric           G             6”X 8”

                Bottom Front Interfacing              H             6”X 8”   Press to the wrong side of the lining fabric.

                Clear Vinyl @least 12ga.                V             6”X 7” Fold in half so it measures 3 ½”X 6” with fold at top.

                Back Lining Fabric                             I               6”X 8”  

                Back Lining Interfacing                   J              6”X 8”   Press to the back of the lining fabric.

                Zipper Minimum 7” long               Z              At least 9” is best, the longer the easier to work with.

                OPTIONAL:  2 Short pieces of ribbon or binding to attach hardware if desired and a long piece of ribbon to go around the neck.

                2 D rings or key rings for optional neck ribbon






The class is free for those who have purchased sewing or embroidery machines from The Stitching Post. There is a $15 fee due at the time of class for all others. 


{{model.event.first_date}} - {{model.event.last_date}} {{model.event.sections.length}} Sessions {{model.event.sections[0].time}}
{{}} {{s.time}}

Seats available {{model.remainingSeats()}}



Included Materials



This class cannot be purchased online. Please contact the store for more information.